Precont® PU4SE

Delivery Time: not specified

Pressure transmitter for measurement of relative pressure in gases, vapors, liquids and dust – even from harzadous areas

  • 2-wire electronics 4 … 20mA programmable via HART
  • Versions with Modbus and IO-Link available
  • Degree of protection IP69K



The device Precont® PU4SE is an electronic pressure transmitter / pressure switch for monitoring, control and continuous measurement of pressures.

A high variety of versions of process connections and electronic types allows the use for a wide range of applications, also for demanding measuring requirements.

Due to its high accuracy and the digital adjustability by HART®, RS485 Modbus®-RTU or IO-Link® the device Precont® PU4SE can be suited to a wide variety of applications.

The robust design and the high-quality workmanship turns the device into a very high quality product, which even the most adverse environmental conditions cannot affect, whether the lowest temperatures when used outdoors, extreme shock and vibration stress or aggressive media.

A captive laser marking of the type label ensures the identifiability throughout the entire lifetime of the device.

Obviously is the optional marking of a measurement point designation resp. TAG, a customer label or of a neutral type label, of course also per laser marking.

A LABS- resp. silicone-free version, a factory calibration with calibration certificate and a customer specific configuration resp. preset is also optionally available like a material test certificate EN10204 3.1 or a factory certifications for drink water suitability.

Customer specific special versions can be realized short-term on request, e.g. special designs for the process connection or other process materials.

Druck_bis_600 Prozesstemperatur_100_en Schutzart_IP69K_en Genauigkeit_0_5_en Ansprechzeit
Measuring range
Nominal pressure PN 0…1bar to 0…100bar
Output type A – Current 4…20mA HART®
Analogue output 4…20mA 3,9mA…20,5mA
≥ 3,8mA
≤ 22mA
dI ≤ 1µA
Time behavior T90 ≤ 5ms
ton ≤ 0,2s
Interface HART®-compliant (7.0)
1200 Bit/s
Output type V – RS485 Modbus®-RTU
Interface RS485, bidirectional
9600 Baud (4800…38400 Baud)
Time behavior T90 ≤ 2ms
ton ≤ 0,1s
Output type L – IO-Link®
Interface IO-Link® V1.1
Com2 (38400 Baud)
Analogue output 0mA…20,5mA (at 0…20mA)
≤ 0,05mA (at 0…20mA)
≤ 22mA (at 0…20mA)
dI ≤ 1µA (at 0…20mA)
3,8mA…20,5mA (at 4…20mA)
≥ 3,6mA (at 4…20mA)
≤ 22mA (at 4…20mA)
dI ≤ 1µA (at 4…20mA)
Switch output 2x PP (Push-Pull)
switch to +L/-L
Output Uout ≤ 0,2V ≥ Us – 2V
Iout = 0mA…200mA
(current limited ≤ 450mA, short circuit protected)
Time behavior T90 ≤ 2ms
ton ≤ 0,1s
Auxiliary power
Supply voltage Us
(polarity protected)
9 V…35 V DC (with electronic output variant A)
9 V…30 V DC (Ex) (with electronic output variant A)
6 V…35 V DC (with electronic output variant V)
9 V…35 V DC (with electronic output variant L without IO-Link®)
18 V…30 V DC (with electronic output variant L with IO-Link®)
Measuring accuracy
Characteristic deviation ≤ ±0,5% FSO
Long term drift ≤ ±0,2% FSO/year
Temperature deviation Tk Zero+Span ≤ ±0,05%FSO/K
Process conditions
Process temperature Standard: -40°C…+100°C
Extended: -40°C…+135°C (+140°C – 1h)
Pressure cycles ≥ 100Mio. (1,2xPN)
Environmental conditions
Environmental temperature -25°C…+100°C
Protection level IP69K/IP67 (EN/IEC 60529)
MTTF 463 years

Product configurator