Thermocont® TS4S

Delivery Time: not specified

Temperaturesensors and -transmitters Pt100 with self-monitoring

  • Analouge and up to 2 switching points
  • Self-verifying measured value
  • On-site programming with bright LED display

 

Description

The devices of the series Thermocont® TS4 with integrated digital evaluation electronic are compact temperature switches for monitoring, regulation and continuous measuring process temperatures from -99,9°C to +500°C in gases, steams, liquids and dusts in all industrial application fields at process pressures of up to 60 bar.

Suitable for general applications in

  • Machinery and plant engineering
  • Air-conditioning and refrigeration plant engineering
  • Hydraulic and pneumatic systems
  • Process industry
  • Environmental technology

 

Function

At the single channel temperature switch Thermocont® TS4S the recording of the process temperature is made by a resistive temperature sensor element Pt100 of class A.
This allows a precise and long term stable temperature measurement.

At the dual channel temperature switch Thermocont® TS4S the recording of the process temperature is made in parallel by a resistive temperature sensor element Pt100 of class A and also by a semiconductor temperature sensor KTY.
Because of the parallel measurement with two different thermal coupled sensor elements (Pt100 and KTY) the temperature switch detects drifts of one sensor and errors at the temperature measurement automatically with high safety.
At the failure of one of the two sensor elements the temperature measurement can be also continued with the second element, what realizes a redundancy function.

The recorded temperature of the respective temperature sensor is transformed into an electrical signal that is recorded and processed in high resolution by a processor.

The PNP switching output resp. outputs are driven according to the respective settings.
When using the analogue signal current output the recorded temperature signal is adjusted according to the settings and transformed into a high resolution output signal of 4…20mA.

By 3 sensor keys and the four digit LED display all settings for the pnp output resp. outputs,the display and also the analogue output can be set resp. adjusted.

4_20mA_2_PNP LED_Anzeige 4_20mA_2_PNP CIP_SIP V4A
Auxiliary power
Supply voltage 10,5 V…35 V DC, reverse polarity protected
Supply current ≤ 60mA
Analogue output max. 22,5mA Switch output with no load
2xPNP-switch output
Function PNP switch to +L
Output current 0mA… ≤ 200mA
power limited
short circuit protected
Analogue output 4…20mA
Operating Range 3,9mA…21mA
min. 3,8mA
max. 22mA
Permitted load ≤ (US – 10,5) / 20mA
Start-up time ≤ 1 ms
Measuring accuracy
Characteristic deviation Display / Switch output: ≤ ±0,6K bei ±100°C
Current output: ≤ ±0,9K bei ±100°C
Display / Switch output: ≤ ±0,2K (Type self-supervision)
Current output: ≤ ±0,4K (bei Typ Selbstüberwachung)
Drift monitoring: ≤ ±0,2K (Type self-supervision)
Long term drift ≤ ±0,1% FS/year
Temperature deviation Display / Switch output: ≤ ±0,003% FS/K
Current output: ≤ ±0,008% FS/K
Materials
Sensor tube
(process wetted)
Steel 1.4404 (AISI 316L)
Steel 1.4571 (AISI 316Ti)
Process connection
(process wetted)
Steel 1.4404 (AISI 316L)
Steel 1.4571 (AISI 316Ti)
Surface quality Ra < 0,8µm
Neck tube CrNi-Steel
Junction housing CrNi-Steel
Control panel surface PES
Electrical connection part Device plug PUR
Pressure compensation element Acrylic copolymer
Gaskets
(process wetted)
FPM – fluorelastomere (z.B. Viton®) / Type 4 / type 5 process
wetted: FPM – fluorelastomere (e.g. Viton®) , EPDM, FDA-listet
Environmental conditions
Environmental temperature -40°C…+85°C
Process temperature -100°C…+500°C (depending on type)
Process pressure 0bar…+100bar (depending on type)
Protection class IP65 (EN/IEC 60529)
IP67 (EN/IEC 60529)

Documentation german

User manual
Datasheet

Documentation english

User manual
Datasheet

Product configurator