Standard-immersion-resistance thermometer Pt100 for sliding sleeve
- Simple assembly via sliding sleeve
- Can be combined with a transmitter in the connection head
- A large selection of connection heads
ACS Pt100 probes have a high accuracy and reproducibility are extremely reliable. The sensing elements are embedded in the protective tube with magnesium oxide powder and are sealed hermisch. Thus, a good heat transfer and vibration protection is achieved.
Standard measuring temperatures are -70 ° C. .. +300 ° C; High temperature versions +500 ° C / +600 ° C, low-temperature versions, special materials, special process connections and OEM versions are also available. The given measuring temperature refers to an average temperature at the probe tip.
With cable versions, for example PTS / PTK and Pt100 sensors with connection head, possibly with integrated head transmitter, the respective maximum temperature of the cable, heads, etc. with on-site isolation, use of Pt100 must be considerated.
The measurement speed of the individual Pt100 sensor is highly dependent on operating conditions, the measured medium and the physical dimensions.
The immersion depth should not be less than 50 mm. Please clarify always shorter probe lengths with the ACS staff.
|Measuring element||Platinum resistance element Pt100 / Pt1000|
(at the measuring tip)
-70°C…+500°C (on request)
-70°C…+600°C (on request)
low-temperature version (on request)
|Tolerace class||AA, A, B – according to IEC 60751|
|Signal type||1 x Pt100: in 2-, 3- and 4-wire connection
2 x Pt100: in 2 x 2- or 2 x 3-wire connection
3 x Pt100: in 3 x 2-wire connection
free skinner for self-installation of a head transmitter
head transmitter, 4…20 mA/ 0…10 V output, standard, Ex,
Profibus; others on request
|Connection type||terminal compartment in Alu-, plastic- or stainless steel housing
fix connection cable – PTFE shielded, silicone, PVC, glass silk with steel mesh
Lemo-plug system, M12 plug system
others on request
|protective tubes made of seamless stainless steel: 1.4571(AISI 316Ti)
flanges, process connections: 1.4571 (AISI 316 Ti)
special materials on request
|housing:aluminium, CrNi-steel, PP-polypropylene, POM-polyoxymethylene
cable material see „connection type“
Documentation germanUser manual
Documentation englishUser manual